OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 95 / 181

NOTE:
This option was originally provided to throttle the number of dial-up phone calls made
when processing cards. With the use of TCP/IP connections now being the norm, the FSC
forces this timer to no less than 90 seconds whenever a transactions is completed. Therefore
this setting has become a catch all option to ensure transaction captures occur in a timely
fashion and it’s recommended to leave the system default of 15mins.
15.2.3 Print Price and Total on Network Receipts (option 13)
The
Print Price and Total on Network Receipts
option will remove Price and Total on network receipts.
This option should always be set to “Yes” when a bankcard network is in use.
NOTE:
If you are processing cards to a second network where price and total is not desired,
you can set this option to “No” and then enable printing of price and total under ISO table
setup for bankcards.
The second prompt; “Do you want transaction price displayed on terminal (Y/N)?” will cause the FSC to print
the price per unit on the terminal when the “Use Pump x” message is shown.
15.2.4 Configure Host Port(s) and Devices (option 14)
The
Configure Host Port(s) and Devices
option allows for the definition of the type of device used for
network connectivity and the enabling of the secondary host and its device for connectivity. The Dual-Host
Flag must be enabled for the secondary host to be available (see SHOW FLAGS).
Enter option number or press [RETURN] to exit: 14
Modem setting for Primary Host: New OPW Host modem
Port unlocked and usable by all networks.
Change Primary Host device settings (Y/N)? y
1 - Change Modem type/init string
2 - Use TCP/IP connection device
3 - Lock Host Modem to Port
Enter option: 1
Configure init string for Primary Host modem;
'M' for 33.6k baud HOST modem.
'N' new 2400 baud HOST modem (purchased after 6/05).
'O' old 2400 baud HOST modem (prior to 6/05) OR US Robotics.
'C' to configure device specific string.
Enter option: O
Old OPW/US Robotics modem selected!
NOTE:
When an Abierto/Systech IP converter is used to process transactions, option ‘O’ for
Old OPW/US Robotics modem should be selected.
Modem setting for Secondary Host: Old OPW/US Robotics Host modem
Port unlocked and usable by all networks.
Doc. No.: M00-051.00 Rev.: 10
Page 95 of 181