Section 8 Display Prompts & Receipts
8.1 Dual Language
8.1.1 Set Language
The
Dual Language
feature allows the
System2™
to change its prompts and receipts to another
language. When the cards are set up in the buffer, they are assigned a language code. When the card is
read by the system it checks the card configuration to determine the language code. From this point on, the
terminals will prompt and print receipts in the card-assigned language.
NOTE:
Network cards do not support dual language and will use Language 1, except in the
case of receipts.
Dispenser Terminal Control (DTC)-enabled systems use Language 2 to support DTC
terminals, messages and prompts must be configured in Artware.
To set Dual Language type:
SET LANGUAGE <ENTER>.
Enable DUAL language (Y/N)? Y
--DUAL language Enabled
8.2 Receipts
The
Receipts
section allows configuration of the receipts header, trailer and body.
8.2.1 Format Receipt Header
The Receipt Header can support up to four (4) lines. The system can define a Header for each language and
network receipts. When configuring the network receipt header, never use more than two (2) lines.
To change the receipt header type:
Format Receipt Header <ENTER>
Format Receipt Header
ENTER Language 1 or 2 or N:
Select the desired header
(1 - language 1, 2 – language 2, N Network)
Enter the header
Line 1
è
(Company name)
Invert text (Y/N)?
Line 2
è
(Company name)
Invert text (Y/N)?
Line 3
è
(Company name)
Invert text (Y/N)?
Doc. No.: M00-051.00 Rev.: 10
Page 55 of 181
Summary of Contents for M00-051.00 FSC3000
