OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 128 / 181

BITMAP Training Screens ENABLED for FIT500 Terminals.
NOTE:
It is the SITE OWNER's responsibility to make sure that the correct bitmaps are
installed on the FIT500
™
's flash card. Bitmaps are displayed in order from 50.bmp through
57.bmp. See FIT500
™
documentation for more information on using Bitmaps.
Present (P)etroleum or (C)NG text based Training Screens P/C: c
‘C’ = CNG based Training Screens will displayed!
‘P’ = Petroleum based Training Screen will displayed!
.
Enter Prompting ON time (HH:MM AM/PM): 12:00 AM
Enter Prompting OFF time (HH:MM AM/PM): 12:00 AM
NOTE:
Each record in the ISO table needs to have the “Force Registered Bank Card PIN
prompt?” prompt set to “yes” to allow security code prompt presented at the fuel island
terminal.
IMPORTANT:
Every FSC ships with same security table defined, therefore a Security Code
assigned to a card would be the same at every site. To ensure your site generates a unique
security code from another issue the “SET SECURITY” command and change the default
values:
P>set security
Enter NEW table values
ROW 1: 01 23 45 67 89
45 32 11 23 11
ROW 2: AB CD EF FE DC
Security CODE: 00
Enter CODE: 02
Doc. No.: M00-051.00 Rev.: 10
Page 128 of 181