OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 89 / 181

Section 14 Card/Account Management
14.1 Media Formats
When a proprietary media (ChipKey
®
s, magnetic cards, optical cards) is read from a standard terminal, the
terminal will match the media’s network number to one of the network numbers configured in the terminal. If
there are no matches, the terminal will send the card and network number to the FSC3000
™
for processing. If
the FSC3000
™
is unable to find a match, the terminal will display “INCORRECT CARD”. All non-proprietary
media is sent directly to the FSC3000
™
for processing. The only exception to this rule is the VIU in which the
network is not checked and is sent directly to the FSC3000
™
for processing. The Format is how the
FSC3000
™
will see the media when read.
ChipKey
®
:
Proprietary System2
(R/W only)
Format – NNNNCCCCCCCCCCCCCCC
Proprietary K3000L Format – NNNNCCCCCC
Proprietary K800 Format – NNNNCCCC (ChipKey R/W)
Proprietary K800 Format – NNNNCCCCCC (all other software)
Magnetic Cards:
Proprietary System2 Format – NNNNCCCCCCCCCCCC
Proprietary K800 Format – NNNNCCCC
Non-Proprietary Format – Track 2 first 19 digits
Optical Cards:
Proprietary System2 Format – NNNNCCCCCC
Proximity:
26 BIT – 5 digit Format – CCCCC
26 BIT – 8 digit Format – FFFCCCCC (FFF = Facility code)
NOTE: Other formats could be supported.
VIU (Vehicle Identification Unit):
Format – NNNNCCCCCCCCC
Keypad:
Format – Up to 19 digits
(can be limited – Con-
figure FIT # Command)
Doc. No.: M00-051.00 Rev.: 10
Page 89 of 181