OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 77 / 181

Section 12 FSC3000
™
Memory Structure
The FSC3000
™
memory is divided into three (3) sections as defined below.
12.1 Application Memory
This section of memory is used by theFSC3000
™
for control and storage of the system configuration. The
size of this memory space is determined by the firmware version of the fuel site controller. As new features
are added the amount of application memory can increase and can change the amount of space available to
card/account memory when using memory level 3 or 4.
12.2 Transaction Memory
Transaction Memory
is reserved for the storage of fuel transaction records. The number of available stored
transactions is specified when the FSC3000
™
is purchased.
The FSC3000
™
can be purchased with the following transaction memory levels:
Transaction Level # of Transactions
2 (Stdandard/default) 500
3 1000
4 2000
5 (Requires 2nd SIMM Card) 4350
12.3 Card/Account Memory
The
Card/Account Memory
is used for storage of the Proprietary Card File. The number of available cards
and accounts that can be stored is specified when the FSC3000
™
is purchased.
TheFSC3000
™
can be purchased with the following card/account memory levels (table represents memory
as of 1.16b):
Card Memory Level
# Cards &
Accounts Min PCF
Options Avg PCF
Options Max Pcf
Options
2 (Standard/default) 2000 2000 2000 2000
3 8000 8000 8000 7580
4 64000 53925 18660 7580
5 (Requires 2nd SIMM
Card)
64000+ 150000 60472 24560
NOTE:
As mentioned above in section 12.1, the maximum amount of card/account records
available will vary as FSC application memory increases. This condition should be considered
when purchasing the card memory level to meet your needs.
Doc. No.: M00-051.00 Rev.: 10
Page 77 of 181