OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 83 / 181

1. Specify Card/Tran buffer size
2. Define Card/Account record
3. Clear Card Record Totals
4. Reconcile Card Record Allocation
5. Clear All Account Record Totals
6. Reconcile Account Record Allocation
7. Month End Totals
8. Additional Options
X. Exit
Enter Choice:
12.4.14 Set Card Buffer (option 8) – Additional Options
To set up Additional Options type:
Set Card Buffer <ENTER>.
1. Specify Card/Tran buffer size
2. Define Card/Account record
3. Clear Card Record Totals
4. Reconcile Card Record Allocation
5. Clear All Account Record Totals
6. Reconcile Account Record Allocation
7. Month End Totals
8. Additional Options
X. Exit
Enter Choice: 8
Card invalid after 3 BAD PINs (Y/N)?
Discard Leading Zeros on "Prompt_Seq." entries (Y/N)? Y
(Only if Prompt-Seq. in Card/Account record is enabled)
Process ALL Voyager cards as PCF based (Y/N)? Y ( IMPORTANT – see below)
Prompt for Odometer on ALL Voyager cards (Y/N)? Y
Prompt for Vehicle Number on ALL Voyager cards (Y/N)? Y (saved as add. prompt)
Mask card number on receipts (Y/N)? Y
Allow keyed cards (Y/N)? Y
- Card valid after 3 BAD PINs
- Leading Zeros Discarded on "Prompt_Seq." Entries.
- All Voyager cards will process as PCF authorized
- Odometer will be prompted for
- Vehicle Number will be prompted for
- Card number will be masked on Receipt
- Keyed entry of Voyager cards allowed
IMPORTANT:
“Process ALL Voyager cards as PCF-based” should only be enabled for non-
public sites. Enabling this option will allow every Voyager card to be accepted (offline).
Doc. No.: M00-051.00 Rev.: 10
Page 83 of 181