![background image](http://html1.mh-extra.com/html/opw/m00-051-00-fsc3000/m00-051-00-fsc3000_command-line-configuration-manual_1645927016.webp)
Not Configured
: The modem is present, but user has not used ”Set
WiFi
” to give the modem connection
information
Configuring
: The modem has been given setup information, but has not yet seen the access point
Configured
: The modem has at some time connected to the access point. It may or may not be connected to
the access point at this instant, but the given settings are proven to be valid:
P>show sys
FSC3000: R/W Chipkey
Card Record Version #: 6.01a – Built: 7/01/11 – Serial #:
Loader Ver: 1.01A June 20,2005 Loader2: 1.02A FPGA Ver: 3.0
Wifi Modem: Configured
IMPORTANT:
The FSC3000's network port setting is set to 2101 during manufacturing. It
might have been changed during the FSC3000's network setup. Make sure the port settings
match.
Doc. No.: M00-051.00 Rev.: 10
Page 16 of 181
Summary of Contents for M00-051.00 FSC3000
