OPTIMUM
M A S C H I N E N - G E R M A N Y
Maintenance
Version 1.1.6 dated 2014-10-16
Page 93
Original operating instructions
F150
GB
10
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repair
of the CNC machine
The diagram below shows you which tasks belongs to which term.
Img.10-1: Maintenance – Definition according to DIN 31 051
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
long service life of the CNC machine and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
10.1
Operating material
10.1.1 Machine lubricants
Only use appropriate lubricants which guarantee a safe operation of the machine.
Recommended lubricant class: ISO V668
Recommended lubricant: guideway oil Mobil Vactra (Oil No. 2) 2)
10.1.2 Cooling lubricants
In order to avoid interferences during operation the water-mixed cooling lubricant and the slide-
way oil or grease need to be compatible.
Read also:
"Cooling lubricants and tanks“ on page 108
INFORMATION
The CNC milling machine is lacquered with a
one-component paint
. Observe this fact when
selecting your cooling lubricant.
MAINTENANCE
Inspection
Maintenance
Repair
Measuring
Cleaning
Mending
Testing
Cleaning
Replacing
Conserving
Lubricating
Completing
Replacing
Readjusting
Adjusting
