OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.1.6 dated 2014-10-16
Page 13
Original operating instructions
F150
GB
require personnel to confirm participation in training/instructions by means of a signature,
check whether the personnel is working safety- and risk-conscious and observe the operat-
ing instructions.
define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
Obligations of the operator
Obligations of
the operator
be specially trained in handling and programming the CNC-machine,
know and understand the program sequence and which effects the individual process
parameters will have,
keep an operator‘s log,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional
requirements
regarding the
qualification
For work on the following CNC machine parts there are additional requirements:
Electric components or operating materials: Must only be performed by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.
1.7
Operator positions
The operator position is in front of the CNC-machine at the sight window or on the machine
control panel.
1.8
Safety devices
Use the CNC machine only with properly functioning safety devices.
Stop the CNCmachine immediately if there is a failure on the safety device or if it is not func-
tioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the CNC machinemust only be used if you
have removed the cause of the failure,
have verified that there is no danger resulting for the personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the CNC machine. The possible consequences
are:
injuries due to tools, workpieces or fragments hereof which are flying off at high
speed,
contact with rotating or moving parts,
fatal electrocution,
pulling-in of clothes.
The CNC machine includes the following safety devices:
a lockable main switch,
One EMERGENCY STOP push-button on the machine control panel and on the electronic
handwheel,
A locked, separating protective equipment around the CNC-milling machine with sight win-
dows made of break-proof Makrolon.
Locking switch on the separating safety devices.
