OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.1.6 dated 2014-10-16
Page 66
Original operating instructions
F150
GB
Function not used in the standard delivery.
Option - Coolant through spindle
Command M7 = Coolant through spindle "On"
Command M9 = Coolant through spindle "Off"
<Coolant> Manual Coolant On/Off Control
•
Press the button to manually turn on the cooling.
•
Press the button again to turn off the cooling system. Command M8
"Coolant On", M9 "Coolant Off".
The following conditions must be met for.
•
Front door is closed.
•
M01 is not active.
•
Alarm 700 064 (Waiting for tool change) is not active.
•
Alarm 700 153 (Main spindle pause) is not active.
•
Alarm 700 156 (Tool changer not at home position, Spindle stop) is
not active.
The LED above the push button starts to flash when:
•
By pressing the button or the command M8, the conditions are not
met.
Img.3-13: “Spindle cooling“ on page 36
<Chip flushing>
Press the push-button in order to switch on the chip flushing. By
pressing the push-button once again, the chip flushing is switched off
again.
Command M12 = Chip flushing ON
Command M9 = Chip flushing OFF
Img.3-14: “Chip flushing“ on page 36
<Working Light>
ON / OFF
<Chip conveyor forward>
Program command M24 = Chip conveyor ON
Program command M25 = Chip conveyor OFF
<Chip conveyor Stop>
Press the push-button Chip conveyor Stop or the push-button <RESET>
in order to stop the chip conveyor.
<Chip conveyor reverse>
Only for easy retracting the screw conveyor.
<Spindle CW>
Direction of rotation clockwise
It is not possible to activate the system in the automatic mode.
Elements on the MCP
Element
Function
5
6
