OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
Version 1.1.6 dated 2014-10-16
Page 72
Original operating instructions
F150
GB
6.2.1 Operating the handwheel for manual travelling
No
.
Designation
1
Touch-switch to release and clamp the tool
7
Milling table
2
Milling spindle
8
Signal lamp (if the signal lamp is illuminated -->
CNC- program is running)
3
16-type tool change system
9
Machine Control Panel
24-type optional tool change system
10
Emergency-stop push button
4
Tool deposit (17 spaces)
11
Handwheel for manual travelling with Emer-
gency Stop push button and acknowledgement
button
5
Chip collection container
12
Cleaning gun
6
Machine vice (optional)
13
Coolant / lubricant tank / chip conveyor
Pos.
No
Designation
Description
Rotary switch
Selector switch to control the individual axis.
Rotary switch
Selector switch for the feed speed
(3 stages).
Hand wheel
Handwheel to travel the individual axes.
Emergency-stop
push button
The EMERGENCY STOP push button switches off
the CNC machine.
Push button resp.
acknowledge-
ment button
In the setting mode resp. if the sliding door is open it
is necessary to actuate the acknowledgement button
in order to expressively allow the movement of the
individual axes.
Drive tension ON
Switches the control circuit of the servo motors
Key switch
Safety switch to activate or
deactivate the tool setting operation
Switch position
0
Setting mode is not available
CNC program processing enabled
possible
1
Setting mode
6
7
8
9
10
10
6
7
8
9
10
1
11
1
11
