OPTIMUM
M A S C H I N E N - G E R M A N Y
Maintenance
Version 1.1.6 dated 2014-10-16
Page 95
Original operating instructions
F150
GB
Validation
Check and maintain all safety-relevant stop, control and measuring devices (validation).
Documentation
Record all tests and works in a operator's log resp. log book.
10.2.1 Preparation
WARNING!
Only carry out work on the CNC machine, if the main switch is switched off and secured
against restarting by means of a padlock.
"Disconnecting and securing the CNC machine“ on page 18
Attach a warning sign.
10.2.2 Restarting
Before restarting, run a safety check.
WARNING!
Before starting the CNC machine, you must check that there is no danger for persons
and that the CNC machine is not damaged.
It is recommended to clean the electrical cabinet every 1000 operating hours.
10.3
Repair
10.3.1 Customer service technician
For any repair work request the assistance of an authorised customer service technician. Con-
tact your specialist dealer if you do not have customer service's information or contact Stürmer
Maschinen GmbH in Germany who can provide you with a specialist dealer's contact informa-
tion. Optionally, the
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
can provide a customer service technician, however, the request for a customer service techni-
cian can only be made via your specialist dealer.
If the repairs are carried out by qualified technical personnel, they must follow the indications
given in these operating instructions.
The company Optimum Maschinen Germany GmbH does not take any liability nor does it guar-
antee against damage and operating malfunctions resulting from failure to observe this operat-
ing instructions.
For repairs only use
faultless and suitable tools,
original parts or parts from series expressly authorized by Optimum Maschinen Germany
GmbH.
