Chapter 2
•
Accessing MGW x100
Accessing MGW x100 59
3.
Type the user name and password in the respective fields and click
OK
; the MGW unit is identified and MGW EMS appears with the
Boards page open. The unit's IP address appears in the Status bar to the
left and the current user level to the right.
Note
Only one Super User or Administrator can log on to a specific MGW unit at a time. If you try
to log on as an additional Super User or Administrator, the relevant unit logs you on as
Guest.
To Use SNMP Community String:
MGW x100 provides a higher level of security using SNMP Community
String.
1.
In the Login window click
Advanced.
An expanded Login window with
Community String appears.
2.
In the Community field, enter the required community string.
Note
The community string is registered in the EMSConfig.ini file.
3.
To close the expanded login window click
Advanced.
4.
click
OK
.
To check the MGW Unit Status after logging in:
1.
Use the following indications:
y
The blue arrow to the upper left
and the green LED in the Status
bar indicate that the MGW unit is responding properly.
StockCheck.com