Chapter 2
•
Creating and Editing a Channel Profile
94 Creating and Editing a Channel Profile
y
DVB Transcoding.
On the Parameters page, in the
IP Input I/F
section,
under
Program
, click
; programs received by the selected DVB-
ASI Input interface are available.
Processing Parameters
y
If you are adding an encoding or transcoding channel, set or change
processing (encoding) parameters as required. For processing (encoding)
parameters, refer to Encoding Parameters (on page 104).
Target Parameters
y
Select the relevant target and click
Edit
; target parameters
appear and can be set or changed.
y
To add different targets, click
Back
and add the desired
targets.
Note
You cannot add or remove targets once you quit the Channel wizard. To add or remove
targets at a later stage, remove the relevant channel and add it again with the desired
targets.
Completing the Channel Wizard
y
When finished, click
Apply
; the Channel wizard closes and
the channel appears in the list with the new parameters set.
y
Hot stand-by channels appear below their primary channels as shown
below.
Figure 32
:
Channels with associated Hot Stand-by Channel
Saving the new Channel as a Template
y
In the Channels list, select the new channel, click
Save
and
assign a name to the respective template; the channel is saved and
available as a template.
StockCheck.com