•
System Overview
System Overview 3
tabs before disconnecting the cable. As you pull connectors apart, keep
them evenly aligned to avoid bending connector pins. Also, before you
connect a cable, make sure that both connectors are correctly oriented and
aligned.
y
ESD Warning
: Normal handling precautions should be taken to avoid
static discharge.
Note
y
Certain specified modular components can be removed and replaced. If you try to
remove or replace a component other than specified, you will void your warranty.
y
Do not try to open or replace parts of modular components, as this will void your
warranty. Modules (fan trays, power supplies) can only be replaced as an entire unit.
The replacement must be an Optibase spare part. Using parts other than Optibase
original spare parts can create hazards and will void the warranty.
y
Depending on the power supplies installed, MGW x100 must be powered either by 100
- 240 V AC or dual 36-72 V DC. Connecting AC power supplies to a DC source or vice
versa will severely damage MGW x100 and possibly cause personal injury.
y
Make sure that you never insert both DC and AC power supplies into the same
platform. This will severely damage MGW x100 and cause personal injury.
y
Do not insert AC power supplies into DC powered platforms and vice versa. This may
damage MGW x100 and void the warranty.
StockCheck.com