Chapter 2
•
Accessing MGW x100
Accessing MGW x100 57
Accessing MGW x100
You manage MGW x100 using MGW EMS, an SNMP based management
application installed on a PC on the network, which allows you to remotely
add, edit and remove service channels associated with installed hardware.
Before starting to operate service channels, you have to log on to the desired
MGW unit.
Users
MGW units ship with three default users configured, each one associated with
a certain user profile. The password for the default users is
optibase
. You can
add, edit and delete additional users associated with these user profiles. Users
are specific to the unit you are logging on to.
User Profile
User
User Rights
Guest
guest
Views channel parameters and profile
Views the list of users allowed to log on to this unit.
Views the list of users currently logged on to this unit.
Administrator
admin
In addition to the Guest rights:
Sets channel parameters.
Adds and removes channels.
Starts and stops playing channels.
Super User
super
In addition to the Administrator rights:
Adds, edits and removes users allowed to log on to this unit.
Logs off other users.
Restarts this unit.
Table 9: MGW x100 Users
Note
y
User names and passwords may consist of max. 255 ASCII-English characters.
y
Only one Super User or Administrator can log on to MGW x100 at a time. If you try to
log on as Super User or Administrator and there is already a Super User or
Administrator logged on, MGW x100 logs you on as Guest.
y
If MGW EMS fails while Super User or Administrator is logged on, the relevant user
remains listed. In this case, log on again as Super User or Administrator. Although
registered as Guest, you will be able to remove the Super Use or Administrator from
the list.
StockCheck.com