Chapter 1
•
Hardware Overview
16 Hardware Overview
Related Topics
y
Analog Input Parameters
y
Digital Input Parameters
y
MPEG Encoding Parameters
y
Targets
y
MPEG Encoder Service Board Parameters
y
Encoder I/O Board Parameters
Host Controller
y
The host controller service board is equipped with two Gig. Ethernet
links, connecting 10/100/1000BT network segments for the output as well
as to an Intel switch.
y
An additional 1000SX network segment can be connected if the host
controller is equipped with an SC-type connector in the PMC slot.
Host Controller (front)
Ports Description
No PMC (Default)
Or
PMC Fiber: Left SC-Type
PMC Fiber : Right SC-Type
Or
PMC Copper: Upper Gig.
Eth. Ch B
PMC Copper: Lower Gig.
Eth. Ch A
Not used, connects a 1000SX network for output
Connects up to two 10/100BT or 1000BT networks for the
output.
Connects up to two 10/100BT or 1000BT networks for the
output.
VGA
Connects a monitor to the MGW x100 unit. Use this connector
only if Optibase instructed you to do so.
COM1
Connects the Configuration PC to the host controller for
configuration using HyperTerminal.
StockCheck.com