Chapter 2
•
Viewing and Setting Service Parameters
78 Viewing and Setting Service Parameters
Enable Multi-Audio
= You can encode up to two audio channels per video
channel.
= You can encode only one audio channel per video channel.
Enable Digital I/O
= Encodes analog or digital input.
= Encodes analog input only.
Enable 15M Video
= Video encoding bit-rates above 10 Mbps are unavailable.
= Video encoding bit-rates up to 15 Mbps are available.
Lists Description
Encoder State
FREE: The input is available and a channel can be added.
STOP: A channel is added, but currently not transmitting.
PLAY: A channel is added and currently transmitting.
Resolutions
= Resolution enabled.
= Resolution disabled.
Table 20: MPEG Encoder Service Board Parameters
Note
If both Video 1 and Video 2 display Play or Stop, you cannot add an additional channel
associated with the respective encoder.
Encoder I/O Boards
y
Encoder I/O boards are available for analog and digital input and are
referred to as MGEI-5210A and MGEI-5210D respectively.
y
To display the desired I/O board parameters, click the associated image.
y
To display input parameters for a certain video or audio input, choose the
relevant input from the Input tree to the left.
StockCheck.com