Chapter
2
•
Setting NTP (Network Time Protocol)
Setting NTP (Network Time Protocol) 71
Setting NTP (Network Time Protocol)
In order to configure NTP services, perform the following steps:
1.
From the main menu select
Tools>NTP
. The NTP Parameters window
appears.
Figure 20
:
NTP Parameters
2.
Select the
System NTP Enabled
check box.
3.
If required, set the following default parameters:
Server IP, Time Zone
,
and
Sync Period.
Note
In the Sync Period field you set the time in which the Host will be synchronized with the
NTP server.
All service boards are synchronized with the Host every minute regardless what is set in the
Sync Period field.
4.
If required select the
Daylight Saving
check box and set the
Start Date
and the
End Date
and
Hour.
5.
Click
Apply.
This will enable NTP functionality.
The
Status
field indicates:
y
Synchronized
- when synchronization is successful
StockCheck.com