y
Use the following safety guidelines to help protect your MGW x100 unit
from potential damage and to ensure your own personal safety.
y
Make sure that only authorized personnel installs, connects and maintains
MGW x100 and its components.
When using MGW x100
y
MGW x100 is heavy. Rack-mount or remove MGW x100 from a rack
with at least two people.
y
Before installing MGW x100, unplug the system to help prevent electric
shock or damage. Certain system board components continue to receive
power any time MGW x100 is connected to AC power.
y
To help prevent electric shock, plug the power cable into properly
grounded sources. Use only properly grounded extensions and adaptors as
the need arises.
y
For AC platforms, use only a UL Recognized power cord.
y
To connect DC platforms to external power supplies, use AWG12 wires.
y
Make sure that MGW x100's chassis is properly grounded.
y
Make sure that nothing rests on your MGW x100 power cable and that
the cables are not located where they can be stepped or tripped over.
y
Do not spill food or liquids on your MGW x100 unit.
y
Do not push any objects into free slots of your MGW x100 unit. Doing so
will damage your MGW x100 unit and can cause fire or electrical shock
by shorting out interior components.
y
Keep your MGW x100 unit away from radiators and heat sources. Also,
do not block cooling vents. Avoid placing loose papers underneath your
MGW x100 unit. Do not place your MGW x100 unit in a closed-in wall
unit or on a bed, sofa, or rug.
y
When you disconnect a cable, pull on its connector or on its strain relief
loop not on the cable itself. Some cables have a connector with locking
tabs; if you are disconnecting this type of cable, press in on the locking
Safety Instructions
StockCheck.com