Optibase MGW 1100, Manual, Page: 85 / 200

Chapter 2
•
Viewing and Setting Service Parameters
Viewing and Setting Service Parameters 79
Analog Video Input
Figure 25
:
Analog Video Input Parameters
Parameters Settings Comments
Interface Status Not in Use Channel stopped or no channel.
In Use Channel assigned and playing.
Input Detect No video source.
Video source detected.
Source Composite Analog video signal that combines all the
components in one signal.
S-Video Analog video signal that carries separate
luminance and chroma signals.
Color System NTSC, PAL,
SECAM, Auto
Detect Determines the color system. MGW x100
and your source device must be set to the
same color system parameter. If you
choose
Auto Detect
, MGW x100
automatically detects the correct color
system (except SECAM which has to be
set manually).
Color System Detect NTSC, PAL,
SECAM If you choose
Auto Detect
, this field
displays either NTSC or PAL accordingly.
SECAM must be set manually.
If the color system could not be recognized
or you chose the wrong color system, this
field displays
N/A
.
Pattern Generation Optibase Color Bar If you choose a test pattern while
transmitting a stream, the receiver receives
StockCheck.com