Chapter 2
•
Target Parameters
Target Parameters 137
Figure 51
:
Target Components, IPv6 window
y
If you are in the process of editing a channel, click the Target tab and
select the desired target from the list; the associated target parameters
appear to the right.
Parameter Settings
Comments
Output Interface
PMC Ch B
PMC Ch A
Front Gig1
Front Gig2
Rear B
If transmitting Unicast,
choose 0 and click Apply;
MGW x100 automatically
sets the output interface
according to the subnet
associated with the Target IP
address.
If transmitting Multicast, click
and select an the
required output interface. 0
option is for Unicast only.
If you edited the default
description, you identify the
interface according to the
modified description.
If Net work redundancy is
applied, standby interface
will not be available as an
option.
IP Version
IPv4
IPv6
When wide range of IP
addresses is required, use
IPv6.
StockCheck.com