OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 26
If no PTZ cameras are controlled through the COM1 port, select
None.
P/T/Z type
controlled
through COM2
Field available only if Some of the connected cameras are
Pan/Tilt/Zoom cameras check box is selected.
If a PTZ camera is controlled through the COM2 port on the video
encoder device, select the required PTZ camera type from the list.
If no PTZ cameras are controlled through the COM2 port, select
None.
•
Camera List and Fields
The camera list contains a line for each camera channel on the device. First line from the top
corresponds to camera channel 1, second line from the top corresponds to camera channel 2, etc.
To change camera settings, select the required camera channel from the list, specify required
information in the following fields, and click the Apply button:
Field
Description
Camera
Name
Name used to identify the selected camera.
Existing names, such as the default camera names Camera 1,
Camera 2, etc. can be changed by overwriting the existing names.
Note: Camera names must be unique for each device.
Cam
Number
Users of the NetGuard-EVS can take advantage of a range of
keyboard shortcuts, some of which let the users toggle between
viewing different cameras. Such shortcuts include numbers, which
are used to identify each camera. Each camera's shortcut number is
specified in the Cam Number field.
A camera shortcut number must not contain any letters or special
characters, and must be no longer than eight digits. Examples of
correct camera shortcut numbers: 3, 12345678. Examples of
incorrect camera shortcut numbers: A*3, 123456789.
It is highly recommended that you use a unique camera shortcut
number for each camera.
Note: Camera shortcut numbers are only used in the NetGuard-EVS.
In other applications, such as the NetGuard, the camera shortcuts
cannot be used.
Tip: You can also assign shortcut numbers to cameras in the
Camera Name and Number window
.