OnSSI NetDVMS Rev 6.5
NetMatrix Monitor
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 248
•
Toggling between Regular and Full Screen View
To quickly toggle between viewing the NetMatrix Monitor window in full screen or regular view,
double-click anywhere inside the NetMatrix Monitor window.
•
Changing the Configuration of a Running NetMatrix
Monitor
To change the configuration of a running NetMatrix Monitor, do the following:
1.
Open the NetMatrix Monitor window.
Right-click anywhere inside the NetMatrix Monitor window, and select Config from the
menu that appears:
2.
Specify the password required for communicating with your NetMatrix Monitor:
3.
Click OK.
This will open the NetMatrix Monitor Configuration window. Each of the window's settings is described in
the previous section, First Time Configuration.
4.
Make the required changes, and click OK when ready.
•
Accepting Received Commands
As part of the image exchange between computers on the NetMatrix system, other
computers (exactly which computers are defined as part of your NetMatrix Monitor
application's configuration) are able to send commands to your NetMatrix Monitor. The
commands typically tell your NetMatrix Monitor to connect to, or disconnect from, an
image feed from a particular camera.
As part of the configuration, your NetMatrix Monitor application may have been set up to
automatically accept all received commands, in which case new image feeds will
automatically be displayed in your NetMatrix Monitor window.
If your NetMatrix Monitor has not been set up to automatically accept all received
commands, you will be prompted to accept all received commands before they are
executed. When a command is received, a small dialog will be displayed in the bottom
right corner of your screen. The dialog will display the IP address or hostname of the
sender as well as information about the command itself.
