OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 143
This will copy the selected output to the On Motion Detected list, which lists all outputs to be
automatically triggered when motion is detected by the camera..
Good to know:
•
You are not limited to selecting output connected to the camera itself. If output has been
defined on other cameras/devices on the NetDVMS system, this output will also be
selectable in the All Outputs list.
•
An unlimited number of outputs may be selected this way.
•
The Output Settings for [Device Name] [Camera Name] window also lets you select
output for manual triggering in the
NetGuard
and
NetGuard-EVS
. This is further described
in
How to Add a Manually Controlled Output
.
8.
When ready, click the Output Settings for [Device Name] [Camera Name] window's Exit button to
return to the Camera Settings for [Device Name] [Camera Name] window.
9.
In the Camera Settings for [Device Name] [Camera Name] window, click OK to return to the
Administrator window.
10.
Close the Administrator.
The defined output will now be triggered automatically when motion is detected by the selected
camera.
Note that the automatic output triggering will be controlled entirely by your motion detection
settings for the camera in question. See the description of the
Adjust Motion Detection window
for
more information.
