OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 47
Positions section.
•
Relative:
For a relative positioning PTZ camera, the number of preset positions will
depend on the camera/video encoder and PTZ driver used.
For some relative positioning PTZ cameras you will only be able to use preset positions
defined on the camera/video encoder itself (when this is the case, the preset positions are
typically defined through the camera/video server's “built-in” web page).
For relative positioning PTZ cameras allowing definition of preset positions through the
NetDVMS system, you define a preset position by moving the PTZ camera to the required
position with the controls in the PTZ View section, then naming the position in the
window's Preset Positions section.
•
How to Define a Preset Position
To define a preset position, do the following:
Note: Some PTZ cameras of the relative positioning kind do not allow you to define preset
positions as described in the following; for such cameras, you should define preset positions on
the camera/video encoder itself.
1.
First use the controls in the PTZ Preset Positions for [Device Name] [Camera Name]
window's PTZ View section to move the PTZ camera to the required position.
2.
Having moved the PTZ camera to the required position, select an undefined item (may be
labeled Undefined or with a position number) in the Preset Positions section's list of
preset position names, and click the Set Position button to define a name for the preset
position.
For detailed information about the functionality of PTZ Preset Positions for [Device Name]
[Camera Name] window—such as the ability to test your preset positions, the ability to
combine preset positions with events, or the ability to use preset positions in PTZ
patrolling schemes—see Preset Positions for [Device Name] [Camera Name] window's
sections in the following.
You are able to define up to 50 preset positions.
•
PTZ Preset Positions for [Device Name] [Camera
Name] Window's Sections
Each of the PTZ Preset Positions for [Device Name] [Camera Name] window's sections are
described in the following:
•
PTZ View Section
The PTZ View section lets you control the PTZ camera, and watch the PTZ
camera's movements. You use this section to move the PTZ camera to the
positions you then define as presets positions in the Preset Positions section.
To move the PTZ camera, simply click the required position in the preview picture.
