OnSSI NetDVMS Rev 6.5
Video Clients
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 194
link to a position in the view to clear the position, or simply overwrite a position by dragging a different
camera to the position.
4.
NetGuard users on your surveillance system will now able to access the view in the shared group
as from their next login.
Tip: In addition to cameras, you are able to add static images and HTML pages to views. See
Further Configuration
.
Using Your Views on Different Computers
Your user settings, including your private views, are stored on the NetDVMS server. This means that you
are able to use your private views on any computer that has a NetGuard installed, provided you log in to
the NetGuard with your own user name and password.
Note: From time to time your system administrator may make changes to camera or user properties on
the NetDVMS server. When this is the case, such changes will take effect in the NetGuard the first time
you log in after the changes were made. Such changes may occasionally require you to re-create your
views. Ask your system administrator if in doubt.
Further Configuration
In addition to creation of groups and views, the NetGuard's Setup tab lets you edit existing groups and
views. The Setup tab furthermore lets you adjust camera settings, and set up joystick control for PTZ
(Pan/Tilt/Zoom) cameras.
Note: Particular user rights may be required in order to access the Setup tab. Your ability to edit groups
and views also depends on your user rights. Basically, if you are able to create groups and views, you are
also able to edit them.
•
Which Types of Groups are You Able to Edit Views in?
Depending on your user rights, you may be able to create and edit views in the following types of
groups:
•
Private and shared
•
Private, but not shared
•
Shared, but not private
•
None at all
To quickly determine which types of groups your user rights permit you to create and edit views
in, do the following:
1.
Select the NetGuard's Setup tab.
Note: Particular user rights may be required in order to access the Setup tab. If you are
not able to access the Setup tab, you are unable to create views.
