OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 128
Now specify information in the following fields:
•
Sensor connected through: Select the camera/device input port on which the input unit is
connected. Some cameras/devices only have a single input port; in that case simply
select Input 1.
•
Event occurs when input goes: Select whether the input event should be triggered when
the signal on the input sensor rises (High) or falls (Low).
•
External event name: Specify a name for the event. Note that event names must not
contain the following characters: < > & ' " \ / : * ? | [ ]
•
(Optional) If requiring an e-mail alert to be sent automatically when the event occurs,
select the Send e-mail if this event occurs check box. Note that in order to be able to use
e-mail alerts, the e-mail alert feature must have been set up in the
E-Mail setup window
.
If requiring an image (recorded at the time of the event) to be included in the e-mail
alert, also check the Include image from camera check box and select the required
camera in the list next to the check box.
•
(Optional) If requiring an SMS mobile phone text message alert to be sent automatically
when the event occurs, select the Send SMS if this event occurs check box. Note that in
order to be able to use SMS alerts, the SMS alert feature must have been set up in the
SMS settings window
.
When ready, click OK. This will return you to the I/O Setup window.
4.
In the I/O Setup window, your newly defined event is now listed (you may have to click the
expand icon in front of the name of the camera or other device to see the listing):
Click OK to close the I/O setup window and return to the Administrator window.
For system administrators defining actions to be triggered by events, the event will now be
selectable in line with other events defined on NetDVMS.
