OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 150
Specifying that Archiving Should Apply for
Specific Cameras
To specify that archiving should apply for a specific camera, select the
check box next to the name of the required camera.
Specifying that archiving should
apply for a specific camera
Remember that only when you click OK is archiving actually enabled
for the selected cameras.
Archiving Locations for Individual Cameras
(Static archiving)
If the Automatic path selection check box is not selected, you must
specify an archiving location for each camera. This is further
described under Static Archiving.
Archiving Locations for All Cameras (Dynamic Archiving)
By selecting the Automatic path selection check box, you can specify
archiving locations for all selected cameras in one go to a number of
drives on your network. Archiving will take place dynamically to all
selected drives. This is further described under Dynamic Archiving.
Set all
Selects the check boxes for all cameras listed in the Select cameras
for which the archiving function should apply section.
Clicking the Set all button is thus a quick way to specify that archiving
should apply for all cameras listed. Remember that only when you
click OK is archiving actually enabled for the selected cameras.
Clear all
Clears the check boxes for all cameras listed in the Select cameras for
which the archiving function should apply section.
Clicking the Clear all button is thus a quick way to specify that
archiving should not apply for any of the cameras listed. Remember
that only when you click OK, archiving is actually disabled for the
selected cameras.
Set all
paths
Note: This button is only available if the Automatic path selection
check box is not selected.
Copies the selected path listing to all cameras listed in the Select
cameras for which the archiving function should apply section.
If you use the same archiving directory for all cameras, this can save
you having to manually specify identical paths for each camera.