OnSSI NetDVMS Rev 6.5
NetMatrix Monitor
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 247
If using 2×2, the image feeds will be inserted in top-left-to-bottom-right order, according
to a first-in-first-out principle: Image feeds will remain in the position in which they were
loaded; when all four positions are used, any new image feeds will replace the oldest
image feeds.
A slightly different configuration is also possible, in which case new image feeds will
always be displayed in the top left position while any previously received image feeds will
be shifted one position forward and eventually be ”pushed out:”
•
Camera Information
Depending on configuration, the NetMatrix Monitor window is able to show camera information
immediately above images:
The same image with and without camera information
•
Image Aspect Ratios
Depending on configuration, images in the NetMatrix Monitor window can either be displayed with
their original aspect ratio, or be stretched to fill the available space:
The same image with (left) and without (right) original aspect
ratio. Note how keeping the original aspect ratio often leads
to black bars around the images, whereas stretching may
distort the images slightly