OnSSI NetDVMS Rev 6.5
System Requirements
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 5
information is displayed near the bottom of its System tab. Should the server require a DirectX
update, the latest versions of DirectX are available from
http://www.microsoft.com/downloads/
.
Operating
System
Microsoft Windows XP Professional (32 bit or 64 bit*) and Windows
Server 2003 (32 bit or 64 bit*), Windows Vista Business (32 bit or 64
bit*), Windows Vista Enterprise (32 bit or 64 bit*) and Windows Vista
Ultimate (32 bit or 64 bit*).
CPU
Intel Pentium 4, 2.4 GHz or higher.
RAM
Minimum 256 Mbyte (512 MB recommended for larger views, 1 GB
recommended on Microsoft Windows Vista).
Network
Ethernet (100 Mbit or higher recommended).
Graphics
Adapter
AGP or PCI-Express, minimum 1024 x 768 (1280 x 1024 recommended),
16 bit colors.
Hard Disk Space
Minimum 10 Mbyte free.
Software
DirectX 9.0 or newer.
* Running as a 32 bit service/application.
Tip: To check which DirectX version is installed on a computer, click Start, select Run..., and
type
dxdiag
. When you click OK, the DirectX Diagnostic Tool window will open; version
information is displayed near the bottom of its System tab. Should the server require a DirectX
update, the latest versions of DirectX are available from
http://www.microsoft.com/downloads/
.
•
NetPDA/NetCell Server
The NetPDA/NetCell Server is typically installed on the surveillance system server; see the
system requirements for the surveillance system server.
Note, however, that to run the NetPDA/NetCell Server the following is also required on the
surveillance system server:
•
Internet Information Services (IIS) 5.0 or later
•
Microsoft .Net Framework 1.1.
Note that later versions of. Net Framework may also be present on the server. If .Net Framework
1.1 as well as one or more later versions are present on the server, Windows' default settings
may cause a later .Net Framework version to be used instead of .Net Framework 1.1. To
verify/change which .Net Framework version is used, do the following:
1.
Click Start and select Control Panel.
2.
Click Administrative Tools.
3.
Click Internet Information Services.
