OnSSI NetDVMS Rev 6.5
Video Clients
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 206
Expanded sequence indication. Date and
time format may be different on your computer.
•
PTZ Control
The Browse tab's PTZ Control section lets you navigate recorded images from IPIX cameras (IPIX
is a technology allowing creation and viewing of 360-degree panoramic images).
Note: The Browse tab's PTZ Control section cannot be used for controlling PTZ (Pan/Tilt/Zoom)
cameras, as the Browse tab is used for viewing already recorded images.
Point-and-Click Control
Many IPIX cameras may be controlled simply by pointing and clicking inside the images from the
camera.
If you see a set of crosshairs when placing your mouse pointer over the images from an IPIX
camera, point-and-click control is supported for the camera. Refer to the release note for
information about point-and-click support.
PTZ Navigation Buttons
As an alternative to point-and-click IPIX control, use the navigation buttons in the PTZ Control
section to move around the view from the selected IPIX camera. The round middle button lets
you quickly move the camera to its home (i.e. default) position. The plus and minus buttons lets
you zoom in and out respectively.
PTZ Preset Positions
The Presets list does not apply for navigating recorded images from IPIX cameras.
IPIX PTZ Preset Positions
You are able to move to a specific position in the IPIX view, and then save that position by
clicking the Save button. When you later want to return to the saved position, click the Load
button.
•
Printing Images
With the Browse tab's Print section, you are able to print recorded images.
To print an image, do the following:
1.
Select the required camera from the Print section's Source list.
Alternatively, you may select the camera in the view.
2.
Select the required date and time by using the controls in the Time Navigation section.
