OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 142
4.
In the I/O Setup window, your newly defined output is now listed (you may have to click the
expand icon in front of the name of the camera or other device to see the listing):
Click OK to close the I/O setup window and return to the Administrator window.
5.
In the Administrator window, first select the camera for which the output should be available,
then click the Settings... button.
This will open the
Camera Settings for [Device Name] [Camera Name] window
.
6.
In the Camera Settings for [Device Name] [Camera Name] window, click the Outputs... button:
This will open the
Output Settings for [Device Name] [Camera Name] window
.
7.
In the All Outputs list in the window's left side, select the required output, then click the >>
button located between the All Outputs list and the On Motion Detected list:
