OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 45
Tip: The other two indicators serve the following purposes: The red indicator lights up when
motion has been detected, and the green indicator is used for indicating that images are received
from a camera.
•
Specifying Events for which Event Indication Should Be
Used
To specify which events should trigger an event indication for the camera, do the following for
each required event:
1.
In the Available Events list, select the required event.
Tip: You are not limited to events associated with a particular device: You are able to
select between all available events (input events, timer events, event buttons) from all
cameras on the NetDVMS surveillance system.
2.
Click the >> button to copy the selected event to the Active Events list.
When an event listed in the Active Events list occurs, the event indicator will light up.
3.
Repeat for each required event.
To remove an event from the Active Events list, select the event in question, and click the <<
button.
PTZ Pre
