![background image](http://html.mh-extra.com/html/omron/v1000/v1000_user-manual_741325083.webp)
4.6 Application Selection
Several Application Presets are available to facilitate drive setup for commonly used applications. Selecting one of these
Application Presets automatically sets the required parameters to the Application Preset default values and selects I/Os.
In addition, the parameters most likely to be changed are assigned to the list of User Parameters, A2-01 through A2-16.
These can be accessed in the Setup Mode and provide quicker application adjustment by eliminating the need to scroll
through multiple menus.
The following presets can be selected:
Note:
The drive parameters should be initialized by setting A1-03 to “2220” or “3330” prior to selecting an Application Preset.
WARNING! Confirm the drive I/O signals and external sequence before performing a test run. Setting parameter A1-06 may change
the I/O terminal function automatically from the default setting. Failure to comply may result in death or serious injury.
No.
Parameter Name
Setting Range
Default
A1-06
Application Presets
0: Disabled
1: Water supply pump
2: Conveyor
3: Exhaust fan
4: HVAC
5: Compressor
6: Hoist
7: Traveling
0
u
Setting 1: Water Supply Pump Application
Table 4.5 Water Supply Pump Parameter Settings
No.
Name
Default Setting
A1-02
Control Method Selection
0: V/f Control
b1-04
Reverse Operation Selection
1: Reverse Prohibited
C1-01
Acceleration Time 1
1.0 s
C1-02
Deceleration Time 1
1.0 s
C6-01
Duty Rating
1: Normal Duty
E1-03
V/f Pattern Selection
0FH
E1-07
Mid Output Frequency
30.0 Hz
E1-08
Mid Output Frequency Voltage
50.0 V
L2-01
Momentary Power Loss Operation Selection
1: Enabled
L3-04
Stall Prevention Selection during Deceleration
1: Enabled
Table 4.6 Water Supply Pump: User Parameters (A2-01 to A2-16)
No.
Parameter Name
No.
Parameter Name
b1-01
Frequency Reference Selection
E1-07
Mid Output Frequency
b1-02
Run Command Selection
E1-08
Mid Output Frequency Voltage
b1-04
Reverse Operation Selection
E2-01
Motor Rated Current
C1-01
Acceleration Time 1
H1-05
Multi-Function Digital Input Terminal S5 Function
Selection
C1-02
Deceleration Time 1
H1-06
Multi-Function Digital Input Terminal S6 Function
Selection
E1-03
V/f Pattern Selection
L5-01
Number of Auto Restart Attempts
u
Setting 2: Conveyor Application
Table 4.7 Conveyor: Parameter Settings
No.
Parameter Name
Default Setting
A1-02
Control Method Selection
0: V/f Control
C1-01
Acceleration Time 1
3.0 s
C1-02
Deceleration Time 1
3.0 s
C6-01
Duty Rating
0: Heavy Duty
L3-04
Stall Prevention Selection during Deceleration
1: Enabled
Table 4.8 Conveyor: User Parameters (A2-01 to A2-16)
No.
Parameter Name
No.
Parameter Name
A1-02
Control Method Selection
C1-02
Deceleration Time 1
b1-01
Frequency Reference Selection
E2-01
Motor Rated Current
b1-02
Run Command Selection
L3-04
Stall Prevention Selection during Deceleration
4.6 Application Selection
82
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
7/16/2008-13:23