![background image](http://html.mh-extra.com/html/omron/v1000/v1000_user-manual_741325059.webp)
3.10 MEMOBUS/Modbus Termination
DIP switch S2 controls the terminal resistance as shown in . The OFF position is the default of the terminating resistor
switch for MEMOBUS/Modbus communications. Turn the terminal resistor switch ON when the drive is the last drive in
a series of slave drives.
Table 3.15 MEMOBUS/Modbus Switch Settings
S2 Position
Description
ON
Internal terminal resistance ON
OFF
Internal terminal resistance OFF (no terminal resistance); default setting
OFF ON
DIP Switch S2
Figure 3.26 DIP Switch S2
Note:
Refer to the MEMOBUS/Modbus communications manual for details on MEMOBUS/Modbus.
3.10 MEMOBUS/Modbus Termination
58
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
7/16/2008-13:23