534
Memory Areas
Appendix C
Flags/Bits for Inner Boards (AR 05 and AR 06)
High-speed Counter Board Slot 2 Flags/Bits (AR 05 to AR 06)
AR 04
00 to 07
Slot 1 Inner Board Error Code (Hex)
00:
Normal
01, 02:
Hardware error
04:
Serial Communications Board error
08 to 15
Slot 2 Inner Board Error Code (Hex)
00:
Normal
01, 02:
Hardware error
03:
PC Setup error
04:
PC stopped during pulse output or A/D (D/A) conversion error
Word
Bit(s)
Function
Operation
AR 05
00
High-speed Counter 1 Reset Bit
Z Phase and software reset
0: Z-phase reset disabled
1: Z-phase reset enabled
Software reset only
0: Software reset disabled
0
→
1: Executes software reset
01
High-speed Counter 2 Reset Bit
02
High-speed Counter 3 Reset Bit
03
High-speed Counter 4 Reset Bit
04 to 07
Not used.
---
08
High-speed Counter 1 Comparison Stop Bit
0
→
1: Starts comparison.
1
→
0: Stops comparison.
09
High-speed Counter 2 Comparison Stop Bit
10
High-speed Counter 3 Comparison Stop Bit
11
High-speed Counter 4 Comparison Stop Bit
12
High-speed Counter 1 Stop Bit
0: Continues operation.
1: Stops operation.
13
High-speed Counter 2 Stop Bit
14
High-speed Counter 3 Stop Bit
15
High-speed Counter 4 Stop Bit
AR 06
00
External Output 1 Force-set Bit
0: Not valid
1: Forced ON
01
External Output 2 Force-set Bit
02
External Output 3 Force-set Bit
03
External Output 4 Force-set Bit
04
External Output Force-set Enable Bit
0: Force-setting of outputs 1 to 4 disabled
1: Force-setting of outputs 1 to 4 enabled
05 to 15
Not used.
---
Word
Bit(s)
Function
