Omron SYSMAC CQM1H Series, Programming Manual

Page: 485 / 602

460
Host Link Commands Section 6-5
Operand, SV (Response)
In “Operand,” specify the name that indicates the SV classification. Specify
the name in four characters. In “SV,” specify either the word address where
the SV is stored or the constant SV.
Note Only the CQM1H-CPU61 CPU Unit has an EM area.
6-5-22 SV CHANGE 3 –– W%
Changes the contents of the second word of the TIM, TIMH(15), TTIM CNT, or
CNTR(12) at the specified program address in the user’s program. With this
command, program address can be specified for a program of up to
99,999 steps.
Command Format
Response Format An end code of 00 indicates normal completion.
Operand Classification Constant or word address
OP1 OP2 OP3 OP4
C I O (Space) IR or SR 0000 to 0252
L R (Space) (Space) LR 0000 to 0063
H R (Space) (Space) HR 0000 to 0099
A R (Space) (Space) AR 0000 to 0027
D M (Space) (Space) DM 0000 to 6655
D M
*
(Space) DM (indirect) 0000 to 6655
E M (Space) (Space) EM 0000 to 6143
E M * (Space) EM (indirect) 0000 to 6143
C O N (Space) Constant 0000 to 9999
@ W %
OP4 OP3 OP2 OP1
x 10
2
x 10
0
x 10
1
x 10
5
x 10
4
x 10
3
x 10
0
x 10
3
x 10
2
x 10
1
x 10
1
x 10
0
OP4 OP3 OP2 OP1 x 10
2
x 10
3
x 10
1
x 10
0
*
↵
Node
No. Program address
(00000 to 99999)
Must be "0"
Name
Timer/counter
(0000 to 0511)
Terminator FCS
Header
code
Operand SV
@ W % x 16
0
x 10
0
x 10
1
x 16
1 *
↵
Node No. Header
code Terminator FCS End code