![background image](http://html.mh-extra.com/html/omron/sysmac-c200h-ct001-v1/sysmac-c200h-ct001-v1_operation-manual_742017091.webp)
77
be the number of pulses per second times 60 divided by the number of
pulses per shaft rotation (i.e., 200), or 0.3 times the pulse count per second.
Switch Settings
In this examples, the unit number selector is set to 1 and the mode selector
is set to 6. All pins except pins 1 and 2 are turned OFF on the back panel
DIP switch to designate pulse and direction inputs.
Wiring
1, 2, 3... 1.
Connect the incremental encoder output to the inputs A.
2.
Do not connect any output to input B, and set the counter to increment.
DM Area Settings
DM 1100
DM 1101
0
0
6
0
0
0
0
1
Sets the mode to 6 (sampling).
Designates use of internal IN1 from the
PC (not control input IN1).
Gate, Latch, and Sampling Modes
Section 4-4
Summary of Contents for SYSMAC C200H-CT001-V1
