Omron SYSMAC C200H-CT001-V1, Operation Manual

Page: 25 / 110

11
Row B Pin no. Row A
20
Input A: neg. 19 Input A: pos.
18
Input B: neg. 17 Input B: pos.
16
Input Z: neg. 15 Input Z: pos.
14
13 Control input IN1: 12/24 VDC
Control input IN1: 0 V 12 Control input IN1: 5 VDC
11 Control input IN2: 12/24 VDC
Control input IN2: 0 V 10 Control input IN2: 5 VDC
9
Outputs 0 through 3
Power supply: 5 to 24 VDC 8 Output 0
7 Output 1
Outputs 0 through 3, COM: 0 V 6 Output 2
5 Output 3
Outputs 4 through 7
Power supply: 5 to 24 VDC 4 Output 4
3 Output 5
Outputs 4 through 7, COM: 0 V 2 Output 6
1 Output 7
Wiring Connectors Solder-type connectors are included with the Counter Unit.
Use wire with a cross-sectional area of 0.3 mm
2
or less. When soldering, do not
short-circuit an adjacent terminal; cover the soldered section with an insulation
tube. When using multicore cable, wire output and input cables separately.
Connector
Wire Insulation tube
C200H-CT002
Wiring
Section 2-2