manualshive.com logo in svg

Omron RL4 Series, Startup Manual

Share
Download
Omron RL4 Series Startup Manual Download Page 44

2-1

Installing the Sysmac Studio

The Sysmac Studio Ver.1.

££

 64-bit edition DVD (SYSMAC-SE200D-64) is the Support Software that

you use for the Robot Integrated System. On it, you can set up the configurations and parameters, you
can create programs, and you can debug and simulate operation.

1

Set the Sysmac Studio installation disk into the DVD-ROM drive.
The setup program is started automatically and the 

Select Setup Language

 Dialog Box is dis-

played.

2

Select the language to use, and then click the 

OK

 button.

The Sysmac Studio Setup Wizard is started.

3

Follow the instructions given by the Setup Wizard to complete the installation.

4

Restart the computer when the installation is completed.

Additional Information

• Refer to the 

Sysmac Studio Robot Integrated System Building Function with Robot Integrated

CPU Unit Operation Manual (Cat. No. W595)

 for information on the system requirements for

the computer to which you install the Sysmac Studio.

• Refer to the 

Sysmac Studio Version 1 Operation Manual (Cat. No. W504)

 if you are unable to

install the Sysmac Studio with the above instructions.

2 Before You Begin

2-2

NJ-series Robot Integrated System Startup Guide (O049)

Summary of Contents for RL4 Series









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands