manualshive.com logo in svg

Omron RL4 Series, Startup Manual

Share
Download
Omron RL4 Series Startup Manual Download Page 24

Related Manuals

The following are the manuals related to this manual. Use these manuals for reference.

Manual name

Cat. No.

Model numbers

Application

Description

NJ-series CPU Unit
Hardware User's Manual

W500

NJ501-

££££

NJ301-

££££

NJ101-

££££

Learning the basic
specifications of the
NJ-series CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provided.

An introduction to the entire NJ-series
system is provided along with the follow-
ing information on the CPU Unit.

•

Features and system configuration

•

Introduction

•

Part names and functions

•

General specifications

•

Installation and wiring

•

Maintenance and inspection

NJ/NX-series CPU Unit
Software User’s Manual

W501

NX701-

££££

NX102-

££££

NX1P2-

££££

NJ501-

££££

NJ301-

££££

NJ101-

££££

Learning how to pro-
gram and set up an
NJ/NX-series CPU
Unit.
Mainly software infor-
mation is provided.

The following information is provided on a
Controller built with an NJ/NX-series CPU
Unit.

•

CPU Unit operation

•

CPU Unit features

•

Initial settings

•

Programming based on IEC 61131-3
language specifications

NJ/NX-series Instructions
Reference Manual

W502

NX701-

££££

NX102-

££££

NX1P2-

££££

NJ501-

££££

NJ301-

££££

NJ101-

££££

Learning detailed
specifications on the
basic instructions of
an NJ/NX-series
CPU Unit.

The instructions in the instruction set (IEC
61131-3 specifications) are described.

NJ/NX-series CPU Unit
Motion Control User’s Manual

W507

NX701-

££££

NX102-

££££

NX1P2-

££££

NJ501-

££££

NJ301-

££££

NJ101-

££££

Learning about mo-
tion control settings
and programming
concepts.

The settings and operation of the CPU
Unit and programming concepts for mo-
tion control are described.

NJ/NX-series
Motion Control Instructions
Reference Manual

W508

NX701-

££££

NX102-

££££

NX1P2-

££££

NJ501-

££££

NJ301-

££££

NJ101-

££££

Learning about the
specifications of the
motion control in-
structions.

The motion control instructions are descri-
bed.

NJ/NX-series
CPU Unit

Built-in EtherCAT

®

 Port

User’s Manual

W505

NX701-

££££

NX102-

££££

NX1P2-

££££

NJ501-

££££

NJ301-

££££

NJ101-

££££

Using the built-in
EtherCAT port on an
NJ/NX-series CPU
Unit.

Information on the built-in EtherCAT port
is provided.
This manual provides an introduction and
provides information on the configuration,
features, and setup.

NJ/NX-series
CPU Unit

Built-in EtherNet/IP

™

 Port

User’s Manual

W506

NX701-

££££

NX102-

££££

NX1P2-

££££

NJ501-

££££

NJ301-

££££

NJ101-

££££

Using the built-in
EtherNet/IP port on
an NJ/NX-series
CPU Unit.

Information on the built-in EtherNet/IP port
is provided.
Information is provided on the basic setup,
tag data links, and other features.

NJ-series
Robot Integrated CPU Unit
User’s Manual

O037

NJ501-R

£££

Using the NJ-series
Robot Integrated
CPU Unit.

Describes the settings and operation of
the CPU Unit and programming concepts
for OMRON robot control.

Related Manuals

22

NJ-series Robot Integrated System Startup Guide (O049)

Summary of Contents for RL4 Series









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands