![background image](http://html1.mh-extra.com/html/omron/ns15-v2-series/ns15-v2-series_setup-manual_743134301.webp)
Appendix 6 Preparing Cables for Computer Connection
A-41
Appendix 6
Preparing Cables for Computer
Connection
Refer to the following information when preparing the CX-Designer connecting cables.
A-6-1 Connecting Cable Assembly
Wire the RS-232C connector to the DOS or 98-NX computer according to the type, as
follows:
•
25-pin Connector
Use the following products to assemble the connecting cable.
Name Model
Details
XM2D-2501
25-pin type
Manufactured by OMRON (computer side)
Connector
XM2A-0901
9-pin type
Manufactured by OMRON (PT side)
XM2S-2511
25-pin type
Manufactured by OMRON (computer side)
Connector
hood
XM2S-0911
9-pin type, mm screws
Manufactured by OMRON (PT side)
AWG28
×
5P IFVV-SB
Multiconductor shielded cable
Manufactured by Fujikura Densen.
Cable
CO-MA-VV-SB 5P
×
28AWG
Multiconductor shielded cable
Manufactured by Hitachi Densen.
Computer
Connector hood
Shield
PT serial port
Connector hood
Summary of Contents for NS15-V2 Series
