![background image](http://html1.mh-extra.com/html/omron/ns15-v2-series/ns15-v2-series_setup-manual_743134194.webp)
6-2 Initializing and Saving Data and Removing the Memory Card
6-20
6-2-8
Initializing Internal Holding Memories ($HB/$HW)
The following procedure is used to initialize the Internal Holding Memories in the PT ($HB0
to $HB8191 and $HW0 to $HW8191). Use the following procedure from the Initialize Tab
Page of the System Menu to initialize the Internal Holding Memories.
1. Press
the
Initialize
Button for the Internal Holding Memories ($HB/$HW). The following
confirmation message will be displayed. Press the
Yes
Button to initialize.
2. When Internal Holding Memory ($HB/$HW) initialization has been completed, the follow-
ing notification message will be displayed. Press the
OK
Button.
Reference
The NS-series PT’s internal holding memory ($HB/$HW) can be initialized by turning
ON the system memory bit $SB34 from the host. Refer to
2-4 System Memory
in the
NS
Series Programming Manual
for details.
Summary of Contents for NS15-V2 Series
