![background image](http://html1.mh-extra.com/html/omron/ns15-v2-series/ns15-v2-series_setup-manual_743134053.webp)
2-2 Part Names and Functions
2-19
Ethernet Connector Pin Arrangement
Pin number
Signal name
Name
1 TD+
Twisted-pair
output (differential output)
2
TD
−
Twisted-pair output (differential output)
3
RD+
Twisted-pair input (differential input)
4 BI_D+
Protection
circuit
5
BI_D
−
Protection circuit
6
RD
−
Twisted-pair input (differential input)
7 BI_D+
Protection
circuit
8
BI_D
−
Protection circuit
When using a cable with a hood (or boot), make sure that the length for connection is at
least 15 mm, as shown in the following diagram.
15 mm min.
Analog GRGB output connector (NS15 Only)
Pin No.
Signal name
1 GND
GND
2 NC
Not
used
3
BLUE
Blue video signal
4
GREEN
Green video signal
5
RED
Red video signal
6
GND
GND
7 NC
Not
used
8
B_GND
Blue video signal GND
9
G_GND
Green video signal GND
10
R_GND
Red video signal GND
11 NC
Not
used
12
VSYNC
Vertical sync signal
13
HSYNC
Horizontal sync signal
14 NC
Not
used
15 NC
Not
used
External Brightness Adjustment Connector (NS15 Only)
You can connect this connector to an external variable resistor to adjust the brightness of the
backlight of the PT.
Summary of Contents for NS15-V2 Series
