Omron NS15-V2 Series, Setup Manual

Page: 76 / 334

3-6 Using Memory Cards
3-22
3-6 Using Memory Cards
1. Memory Cards can be used with the PT. History files can be stored in Memory Cards as
CSV files. There are four different types of history file, as follows:
Alarm/event history: Stores alarm/event history data that has been registered by CX-Designer.
Data log: Stores trend data.
Operation log: Stores screen operation log data.
Error log: Stores error history data for when macros are executed.
The history data is normally saved in internal memory that is backed up in the PT, but
can also be saved in CSV file format. When history data is saved as a CSV file, it is
stored in the Memory Card.
The CSV files containing history data are saved in a user-specified folder in the log
folder created in the Memory Card.
2. The following data can be transferred to the Memory Card.
•
System programs (the programs required to operate the PT, such as for communica-
tions and fonts)
•
Screen data (data used in the PT display)
There are three methods for transferring data, as follows:
•
Automatic download (Transfers data from the Memory Card to the PT.)
•
Automatic upload (Transfers data from the PT to the Memory Card.)
•
Manual transfer (Direction for data transfer is selected manually.)
Precautions
for Correct Use
•
Use a Memory Card recommended by OMRON. Incorrect operation may
occur if a non-recommended memory card is used.
Reference
Recommended Memory Card
Model Memory capacity Memory type
HMC-EF183 128 Mbytes Flash memory
HMC-EF283 256 Mbytes Flash memory
HMC-EF583 512 Mbytes Flash memory
The Memory Card can be overwritten approximately 100,000 times.
When using the PC card socket in devices such as laptop computers, use the HMC-
AP001 Memory Card Adapter.
For details on transferring data with the computer (CX-Designer), refer to Transferring Data
to the PT in the CX-Designer’s Online Help.
3. The data created in Data Block Tables can be saved as CSV files in DBLK folder on a
Memory Card.
4. The contents of the PT’s internal memory can be saved to Memory Cards using macros.
The contents of Memory Cards can also be written to the PT’s internal memory.