Omron NS15-V2 Series, Setup Manual

Page: 203 / 334

6-3 PT Settings
6-29
1. Select Color Print , Monochrome Print , or Monochrome Print (Inverse) in Print Type .
2. After setting, press the Write Button to save the setting.
6-3-9 Orientation
If the printer control method is set to ESC/P raster or BJ raster, select the printing orientation
of the printer that will be connected to the NS-series PT.
1. Select either Portrait or Landscape in Orientation .
Portrait: Prints with the longer page measurement as the height (factory default).
Landscape: Prints with the shorter page measurement as the height.
2. After setting, press the Write Button to save the setting.
6-3-10 Changing Values in Device Monitor Setting
This setting enables using the registered monitor and switch box functions of the device
monitor only for monitoring by prohibiting address changes while monitoring.
Disable Button: Prohibits changing monitor values
Enable Button: Enables changing monitor values (factory default)
This setting can also be made with the CX-Designer on the PT Operation Tab Page of the
System Settings.
6-3-11 Contrast (NS5-SQ @@ /NS5-MQ @@ Only)
This function adjusts the screen contrast. Contrast can be adjusted in 100 degrees.
Adjust the contrast by using operations from the PT Tab Page in the System Menu, as fol-
lows: