223
F3SG-R
User’s Manual
Chapter
7
Tro
ubles
hoot
in
g
Appendix
E
LED Blinking Pattern:
The timing chart below shows the blinking frequency of the LED blinking patterns (blinking once
through seven times) described in the following pages.
You can check error and warning logs by the Maintenance Information function of the Configuration
Tool.
Refer to
Safety Light Curtain Configuration Tool for Model F3SG (SD Manager 2) User’s Manual
for more
information on checking error and warning logs by the Configuration Tool.
7-1-1. Lockout State
7-1-1-1. Description
If F3SG-R detects any failure, it keeps safety output OFF and transitions to lockout state. Under
lockout state, the lockout indicators blink or are ON and other indicators blink based on the failure.
Solve the problems based on the table below.
Eliminate the cause of the problem. Then turn the power ON again or reset the lockout state by
providing a reset input to restart the F3SG-R.*
* The lockout reset function is not available for the F3SG-RE series. Turn the power ON again to
restart the F3SG-RE.
Blinking: Once
Blinking: Twice
Blinking: Three times
Blinking: Four times
Blinking: Five times
Blinking: Six times
Blinking: Seven times
0.4 s
0.4 s
0.8 s
2.8 s
Summary of Contents for F3SG-RA
