Omron F3SG-RA, User Manual

Page: 177 / 268

153
F3SG-R
User’s Manual
Chapter
4
Dimens
io
ns
Wiring/Installation
E
[Side Mounting]
4-4-3-3. Mounting with Top/Bottom Adjustable Brackets (F39-LGTB)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- The Top/Bottom Adjustable Bracket and Standard Adjustable Bracket allow beam alignment after fixing the bracket to a
wall surface. The angle adjustment range of the Top/Bottom Adjustable Brackets is ±22.5°. The angle adjustment range
of the Standard Adjustable Brackets is ±15°.
2-S3
44.6
23.2
26.5
35
6.5
8.2
G H
I
35
9.6
2-M8
40.8
4
51.65
190
14
35
30
P
15 25
H
48.5
64.5
51.75
35.75
G
D
Top/Bottom
Adjustable Bracket
(F39-LGTB)
Top/Bottom
Adjustable Bracket
(F39-LGTB)
Backside : 2-S3
2-M5 or M6
C1 (Protective height for 30 mm)
C2 (Protective height for 14 mm)
<Screw for Top/Bottom Adjustable
Bracket: M5 or M6> <Screw for Top/Bottom
Adjustable Bracket: M8>
F3SG-4RE0190  30
Dimension C1 190
Dimension D 140
Dimension G 277.5
Dimension H 303
Dimension I 322
Dimension P 20
Number of Top/Bottom
Adjustable Brackets*
2
F3SG-4RE0160  14
Dimension C2 160
Dimension D 140
Dimension G 277.5
Dimension H 303
Dimension I 322
Dimension P 10
Number of Top/Bottom
Adjustable Brackets*
2
[ Unit : mm ]
* The number of brackets required to mount either one of emitter and receiver.