Omron F3SG-RA, User Manual

Page: 130 / 268

106
Chapter
2
Opera
ting St
atu
s
Monit
o
ring
F3SG-R
User’s Manual
System Operation and Functions
2-25. Operating Status Monitoring
2-25-1. Overview
I/O information and the state of F3SG-RA can be read out with the Configuration Tool. This function is
only for F3SG-RA Configuration Tool.
Make sure the Position 8 of the DIP Switch is set to Configuration Tool Enabled to activate the settings by the
Configuration Tool.
Refer to Safety Light Curtain Configuration Tool for Model F3SG (SD Manager 2) User’s Manual for more
information on setting this function by the Configuration Tool.
The Operating Status Monitoring is not available for the F3SG-RE.
2-25-2. Readout Information
The user can view the following information related to a receiver.
The information is displayed in a block in case of a cascade connection.
F3SG-RA Series X
F3SG-RE Series
Information Name Description
External wiring
information Power Supply Displays a supply voltage being supplied
OSSD 1 (Black) Linked to safety output 1
OSSD 2 (White) Linked to safety output 2
RESET (Yellow) Linked to Reset/External Device Monitoring (EDM)/Override Input
AUX (Red) Linked to auxiliary output
MUTE A (Gray) Linked to Muting input A
MUTE B (Pink) Linked to Muting input B
Sensor Information Scan code Displays Scan Code setting
EDM Displays EDM setting
Interlock/Pre-Reset Displays Interlock/Pre-Reset setting
Fixed/Floating Blanking Displays Fixed/Floating Blanking setting
PNP/NPN Displays output mode (PNP/NPN) setting
DIP Switch/Configuration Tool Displays DIP Switch/Configuration Tool setting
Operating Status Muting information Linked to Muting state
Override information Linked to override state
Sequence error information Linked to Muting sequence error state or Interlock sequence error state
Safety output information Linked to safety output
Blanking beam unblocked
information Linked to the state where the blanking beam is unblocked
Push-SW information Linked to the input signal of Push Switch